انتخاب و ورق زدن کتاب از قفسه کتابخانه کتاب انتخابی از قفسه بیرون می‌آید، روی میز باز می‌شود و صفحه‌های آن در جهت درست ورق می‌خورند.
معرفی منبع
XL-CU-02-B-0173

Rare Metal Technology 2016 - Experimental Study on Valuable Metals Dissolution From Copper Slag

Book انگلیسی External link
پدیدآور Sun Ying; Zhang Jing; Wang Yan-ze; Li Qiuju
ناشر Springer International Publishing
سال انتشار 2016
اطلاعات کتابشناختی

مشخصات منبع

پدیدآور Sun Ying; Zhang Jing; Wang Yan-ze; Li Qiuju
ناشر Springer International Publishing
سال انتشار 2016
DOI 10.1007/978-3-319-48135-7_9
اثر مادر Rare Metal Technology 2016
موضوع اصلی متالورژی مس
موضوع تخصصی ذوب مس
معرفی و چکیده

توضیحات منبع

خلاصه فارسی

این کتاب در فیلد «متالورژی مس» و زیرموضوع «ذوب مس» قرار می‌گیرد. محورهای قابل تشخیص از عنوان و متادیتای Lens عبارت‌اند از: سرباره، لیچینگ، گوگرد. این منبع مستقیماً بر یکی از اجزای زنجیره ارزش مس تمرکز دارد. برای شناخت و طراحی فرایندهای استخراج، ذوب، پالایش، لیچینگ، استخراج حلالی و الکترووینینگ قابل استفاده است. این متن یک خلاصه موضوعی فارسی بر پایه متادیتای موجود است؛ چکیده انگلیسی، در صورت وجود، در ستون جداگانه حفظ شده است.

چکیده انگلیسی

Copper smelter slag was leached using sulphuric acid solutions under atmospheric conditions. Base on the composition and phase of copper slag, the effect of the concentration of sulfuric acid and leaching temperature to the leaching growth rate of Fe, Cu, Co and Ni in the copper slag were investigated in this paper. Simultaneously, the influence of sulfuric acid concentration, leaching time, leaching temperature and the amount of sulfuric acid (solid-liquid ratio) to the leaching rate of these metal elements were researched. Experimental results showed that: with the increasing temperature, the dissolution rates of the metals elements increased first and then decreased. Due to the influence of silica gel which was obtained in beginning of leaching, the higher the concentration of sulfuric acid is not conducive to dissolution of the valuable metal elements. The dissolution degree of Fe, Cu, Co and Ni were 92.83%, 96.76%, 93.62% and 63.41% respectively.

کلیدواژه‌ها

موضوعات مرتبط

Metallurgy; Materials science; Copper slag; Sulfuric acid; Growth rate; Silica gel; Copper smelter; Metal; Leaching (metallurgy); Dissolution
فایل‌ها و منابع

راه‌های دسترسی به منبع